Posts by Dan
-
-
I don't have experience with big wood guns but this is what I would do. First I'd check the shaft against a good straight edge and make sure it's straight. Then I would make sure that the flopper is not bent, maybe even take it off. I'd check for the shaft to have at least 13" of overhang, any shorter and I'd change to a longer shaft with proper overhang. Then I would put two 5/8 bands on the gun and see how it shoots. I just can't see it not shooting straight like that, theres not much to it unless your handle is really far under the plane of travel of the spear, then I'd bring it closer.
Once its shooting straight I'd start to add power to see where it goes erratic. When you find the point where accuracy starts to suffer you know you need to add weight/volume to the gun.
With that said I believe in dedicated guns. The idea of having a gun where if you need more power and range you can put on side stocks and stuff is good in theory but in reality you never end up doing it back and forth. A gun should be built for the intervals which you jump from target species to target species although there can be some overlap. For big power and range a gun should be designed for that from the start because this makes a gun bulky in the first place and if you start adding shit to make a smaller gun do the work of a big gun it's going to be even more bulky. If there is no possibility of buying the correct gun then of course go ahead with the modifications.
-
You know sometimes I like those wired guys too, when I want to challenge myself. Just have to be careful with them and not go too far. They're most often beginners anyways and are more likely to hurt you with spastic movements than with any kind of legit technique, they're also fun to beat and frustrate.
-
-
jejeje
-
Can you imagine putting a shaft into one of these carp in murky water?
-
Seriously though aren't men always better than woman when it comes to the extreme limits of performance in whichever field?
-
Whatcha talking about? The camo makes you practically invisible against that background of cacti.
-
Beautiful fish, the spots look like a black. Is that you monster?
-
With regards to tattooing fish, may clear something up http://spearfishing.world/showthread.php?t=93
-
I never knew fish could be tattooed so a little online research came up with the following http://www.dgukenvis.nic.in/news03-47.htm
QuoteTUTICORIN Sept. 17. For the first time, the Fisheries College and Research Institute (FCRI) here has come across a ray fish with peculiar markings, probably by acquired by tattooing done by researchers or scientists. The tattooed fish was caught in the trawl net of a fisherman 30 km south of the Tuticorin coast at a depth of 160 metres recently...
...The left side of the dorsal region of the fish is marked with number `3', while the right side is marked with a letter `S'. The fish measures 47.7 cm in length and weighs 500 gms. Experts at the FCRI say that the marking by tattooing is usually done by scientists in fisheries research institutes to study the growth, food habits, reproduction, migration pattern and racial studies of the species. Since tattooing technique is widely done by research institutes abroad, the FCRI has written to South African, Sri Lankan, Australian, Singapore and Malaysian High Commissions in New Delhi to find out whether any leading fisheries research institutes in those countries had tattooed the fish for biological or migratory investigations...
...According to V. K. Venkatramani, Professor, Department of Fisheries Biology and Capture Fisheries, FCRI, tattooing is usually done on juvenile fishes and left in big tanks till the tattooed part is healed. After healing, the fish would be left in open seas to study its migration or biological features. Experts say tattooing is done on a large number of specimen of a particular species. Once the tattooing is done, information is passed on to other fisheries research institutes. Tattooing is considered to be the best technique since it is harmless and the dye mark would be retained permanently on the external body of the fish.
On another more bizarre note http://www.zootoo.com/petnews/lawbanningfishtattooingenenfor
QuoteLaw Banning Fish Tattooing Unenforceable.
October 15, 2007
OKLAHOMA – The Oklahoma City Council upheld a law barring the artificial coloring of fish this week.
The law was challenged after a pet store owner who was found selling fish with “I love you” tattooed on their scales. The fish came from Quality Pets of Oklahoma. Company owner Don Fleming said his fish are dyed using the same techniques as the major chains – like Petco, PetSmart and Wal-Mart – which involves injecting the color into the fish or dying them in a dye bath.
Fleming says he was forced to relinquish about $1,700 in fish. So he went to Oklahoma City Councilman Gary Marrs to have the law challenged.That's when Cynthia Armstrong, state director of the Humane Society of the United States stepped in.
Armstrong contends that artificial coloring is inhumane – whether by dying or injection. She also said that even dye baths – which are legal – are damaging because the fish drink the chemicals. This can lead to high mortality rates and weakened immune systems for those that survive.
But Fleming disagrees with that level of severity. Unfortunately, there's no definitive research on the subject to tip the scales in either direction.
City Councilman Pat Ryan was the sole objector to the compromise – which would continue to allow dye baths. That's because its difficult to tell what method was used for coloring.
But the other seven council members decided to maintain the compromise. That's because Quality Pets employs 115 people – and taking those jobs away is not in the city's best interest.
Pretty sick IMO.
-
My best guess is that if you threw it in the cooler or gear bag there was a piece of paper there with writing on it that came in contact with the fish and the ink transferred on. In this case however the numbers and letters would be mirrored.
What was the weight and length of the fish approx.
-
Davie, yours has a rounded tail.
-
I don't know what kind of grouper it is. Taking this at face value I see something that looks like numbers and letters but I question why you wouldn't take a closer photo of this "tattoo". Lets see where this is going
-
Thanks for that, evokes in me memories of Cuba. It's been too long.
-
-
Here's the metal version.
-
Yes, I remember in Cuba it was the same way, and the shafts weren't even stainless.
Self explanatory. You could probably make these inserts yourself.
-
On the competitor series the handle is held on with two screws. Remove the screws and the handle pops off. You will see the safety bar seated in its groove. Just take it out and replace the handle and screws. Should be the same for the standard series.
-
Grappling is much more easier on the body than striking. For example if I'm injured in a particular area I can ask who I'm working with to not do leg locks at all or not to do it on a particular leg. You can still work with full strength and not worry about injury from your opponent. Injury due to bad movement is another story. In grappling though you can get quite a work out just working from your back.