Yo uso para un 115 y 120 mm varillas de estes grosor: 6'75 mm y 7 mm son grosores polivalentes en cualquier circunstancia de pesca.
Posts by Ramon
-
-
Bueno tuviste suerte con la intuición de encontrar el fusil respecto a la aletilla o muerte o Flopper
hay que llevar el remache con un remachado normal, no demasiado remachado para poder arrancarlo de la roca con el sacavarilla.
-
Bueno chicos esta es la cuestión
En mi zona de pesca estas apariciones son esporádicas
no son continuas y entonces la sorpresa es el motivo del fracaso.
La pesca es todo terreno, agujeros, escolleras, grandes rocas, esperas, caídas y acechos
Pero ocurre que no vas para una pesca determinada el fracaso o acierto depende de la puntería o suerte.
esto es lo que suele ocurrir que es mas fácil el fracaso porque no estas preparado.
<º)))))><
Well guys this is the bottom line
In my fishing zone these tuna surprises are sporadic
they are not continuous and then surprise is the reason for failure.
Fishing is all terrain, holes, rotting rocks, large rocks, waits, falls and stalking
But it happens that you are not preparing a certain fishing
failure or success depends on aim or luck.
this is what usually happens that failure is easier
because you are not prepared.
LOOK IN HD
-
cuidado con la pua
-
Hey Ramon, yep i've used it about 12 dives so far and it works pretty well. Those magnets are pretty small so the force is just enough to function correctly.
Creo que con la mitad te bastaba, la función es sujetar cuando el nailon no vaya por encima de la varilla, pero si crees que esta bien pues perfecto.
I think that half was enough,
the function is to hold when the nylon does not go over the rod,
but if you think it is fine then perfect.
-
Espero que tantos años de invento, den resultado en el mercado algún dia
-
perfecto
-
Added a mag track to both builds today...Ordered the magnets a while back but got them late so had to add them post build. They work great, they hold the shaft when upside down but it falls when shaken. I used N52 magnets, size 8x3mm disc. I used seven in the 130cm due to the longer shaft and six in the 100cm , all were vertically stacked and they were epoxied in for strength and waterproofing/ corrosion resistance . They hold the shaft stronger when they are laid next to each other (greater surface area interacting with the magnets) but i stacked them vertical for esthetics. I like the look of only seeing one small magnet, plus i didn't want too much resistance on the shaft when firing. Here are some pics.
I think there are too many 7 neodymiums stacked
Have you already checked them fishing?
-
Hey Ramon, thanks..Nope the Purple Heart does really well in the water, i made another stock with it about eight years ago and it held up really well even though i didn't maintain it well. Very strong and stable timber but very dense.
Bien espero que sea acertada la elección de la madera, prefiero que mi madero sea funcional aunque feo, a bonito que se estropee por la sal.
-
Muy biennn ¿el palo rosa aguanta el agua?
-
Another way to shoot up and down and broken inner line
-
the face.
DECATHLON > SIC > "Hi there! Thank you for your comment Blue Heart, we have blocked the sale of this product because we donate all available amounts to help in this health crisis. A greeting! Waving hand"
Respuesta de Decathlon a mi tema en TWITTER las donaciones a cero coste y CRESSI también sin coste alguno a Sanidad tanto Nacional como Europea ambas hospitales.
Decathlon response to my topic on TWITTER donations at zero cost and CRESSI also at no cost to both National and European Health both to Hospitals
-
https://www.scubadivermag.com/…covid-19-protective-mask/
''Ocean Reef, which produces full-face diving and snorkelling masks, has created an adaptor which will fit to their snorkelling product and transform it into a COVID-19 protection mask.
The consumer pricing for the adaptor is planned to be purposely low to help current owners convert their snorkelling masks as inexpensively as possible.
The adaptor fits in the connection of any Ocean Reef-produced mask. The filter can be of any type and brand, with the 40mm threading, and to reduce the exhalation effort, you can just push out the exhalation valve cover of the mask.
Ocean Reef already has more than 1.25 million full-face snorkelling masks in the homes of customers around the world, plus good inventory through their worldwide dealers and their US and Italian warehouses.''
Puto negocio
-
The much and probably deservedly maligned full-face snorkel dive mask may be getting a new lease on life as it may help in supplying protective breathing gear for hard pressed medical workers by providing a reusable mask that completely shields the face.
Ocean Reef Launches Adaptor To Change Full-face Snorkel Mask Into COVID-19 Protective Mask | Scuba Diver Mag
Ocean Reef, which produces full-face diving and snorkelling masks, has created an adaptor which will fit to their snorkelling product and transform it into a COVID-19 protective mask.
En España estamos homologando el adaptador para poder hacerse uso sanitario las caretas DUKE ofrecidas por CRESSI Españaporque DECATHLON no quiso participar.
La pieza tiene que ser de un material especial para poder aguantar líquidos desinfectantes, presión, autoclave ..etc..
para poder usarla otros enfermos.
Se ofrecierón muchos técnicos ingenieros y personas para fabricar en 3D esta pieza
sin animo de lucro.
In Spain we are approving the adapter to be able to use the DUKE masks offered by CRESSI Spain for sanitary use because DECATHLON did not want to participate.
The piece has to be made of a special material to be able to withstand disinfecting liquids, pressure, autoclave, etc.
so that other patients can use it.
Many technical engineers and people were offered to manufacture this part in 3D
nonprofit.
http://www.facebook.com/photo.php?fbid=10157245149779389&set=a.125824844388&type=3&theater
http://www.facebook.com/ramon.javier.B/posts/2787945647955917?notif_id=1585288244067175&WCF_AMPERSAND¬if_t=feedback_reaction_generic
-
Testing the Cressi AMBAR PURE 15 mm rubbers on the Roller Inverter 120, these rubbers in different PURE formats work well
Probando las gomas Cressi AMBAR PURE 15 mm en el Roller Inverter 120, van bien estas gomas en distintos formatos PURE
-
Muy bueno! A qué le tiras con eso, Ramón?
A todo lo que se ponga por delante Roller Inverter 120 Testing the Cressi AMBAR PURE 15 mm rubbers
-
-
-
Hi guys this idea is to be able to carry a rifle
Inverter roller with 120 mm rail.
Then when it is loaded in the first teton you have to
take the rubber underneath and stretch forward,
to be able to match the thickness of stretching in the rubbers and load the
last teton.
The gums is only to stretch Cape Dineema
leaving only a margin of stretching of 5 ctms
<º)))))><
Hola chicos esta idea es para poder cargar un fusil
Roller Inverter con rail util de 120 mm.
Despues cuando esta cargado en el primer teton hay que
coger la goma por debajo y estirar hacia adelante,
para poder igualar el grosor de estiramiento en las gomas y cargar al
ultimo teton.
Las gomas es solo para poder estirar del cabo Dineema
dejando solo un margen de estiramiento de 5 ctms
-
Interesting to see two into one bands on each side.
They are joined by these pieces, after years I uploaded a video to
Facebook and Seawolf saw my idea stolen and patented.
As Ermessub told me.
I wanted him to make them.
but it doesn't matter 12 knots
the boys want easy things and the seawolf copy didn't work.
My system is gomasmix 3 gums that give a power in a 105 mm rifle
35m /s and a job of 463 joules.
<º))))><
Están unidas por estas piezas, después de años subí un video a
Facebook y Seawolf vio robo mi idea y patento.
Según me dijo Ermessub.
Yo quería que Él las fabricara.
Pero da lo mismo hay que hacer 12 nudos
los chicos quieren cosas faciles y no le funciono a seawolf la copia.
Mi sistema es gomasmix 3 gomas que dan una potencia en un fusil de 105 mm
35 m/s y un trabajo de 463 julios.