Posts by Dan

I guess doing it with a file can be fun.

What size router bit do you need? I have a few and I used the smaller ones to do the band slot. Don't kill it doing it by hand. Router bits are cheap, you can get a whole set on ebay for less than $20. You'll be able to use it when you build another gun

It's a cannon Mike, good job. It does seem like you could've put the band slot higher. I'm always concerned about getting too close to the track myself, but there's lots of room under your track.

Whether 38" is true band stretch or the total length of the stock, to me that's a dirty water gun.

Slick creature. How long was it?

Well done. Two shots?

Is it a known species or a hoax?

It's good they don't target humans.

I rode my bike by the beach this morning. The water looks very inviting, just the kind of thing to inspire me to dive. But alas I have some things to do.

If I remember right it ran up through the pvc spooling system, and a cleat on the top, then back down through the hole in the front.

I've used a piece of fuel hose anchored in a hole in the board with Aquaseal. You can see it sticking up out of the board in the 3rd pic in this thread http://spearfishing.world/floa…y-beach-diving-board.html.

Very cool the cutout Scubapro. What is the effective range of such guns?

Lunker is correct. It's a spooling system that I made out of PVC. The PVC is painted black.

Good writeup John, fun trip.

You'll need to send it again Hank.

Not vintage judging by the trigger mech but a rustic bamboo speargun.

I was kidding, that's insane if he can pull it off. Gotta be totally positive too..

You nap on your yak? Well I nap sometimes between descents floating

Have a good trip Hank. Nice pics. I guess you're not going to get the slip-tip in time.

Glad you're ok stevo. Sons of bitches..