A rare Fireback Grouper captured by MIke M. using Speardiver Reef 7mm Large-Long size wetsuit.

Kids children size spearfishing wetsuits by Speardiver available in Reef and Pacific camo Speardiver Kids Spearfishing Wetsuits.

Grayson, Sydney Australia.

Franco, Panama City Panama.

14 year old Franco Melis spearfishing Amberjack with a Speardiver kids wetsuit.

Roller Speargun Muzzle kit from Speardiver Speardiver Roller Speargun Muzzle fits the Speardiver Phantom Speargun and any custom build. The roller muzzle will accept bands up to 17.5mm in diameter, great with the Speardiver Small hole 17.5mm bands Speardiver Small Hole Speargun Rubber Tubing.

The Roller Muzzle Kit includes:

• Speardiver Roller Speargun Muzzle
• Reel mount replacement
• Band anchoring bracket
• 3 stainless steel screws
• Band loader

The Roller muzzle on a Speardiver Phantom speargun with carbon barrel.

The 11/16" metric 17.5mm diameter has been added to the Speardiver small hole speargun rubber line up Speardiver Small Hole Speargun Rubber Tubing. Bridging the gap between 16mm and 19mm bands, now you can fine tune your speargun power even better.

Speardiver 1/16" ID tubing next to conventional 1/8" ID tubing

Heavy duty ALL stainless steel 10.25" long Crimping Tool by Speardiver. Stainless steel tool head with stainless steel handles and red non-slip grips, with 4 positions to crimp wire and mono from 50 LB to 450 LB test. Includes a built-in side line cutter. Available from Freedive Store.com Speardiver ALL Stainless Steel Crimping Tool

Note: Crimpers sold by our competitors containing Stainless Steel in the description are almost never completely made of stainless steel. Normally only the handles are stainless steel, this is most evident with crimpers that have a black color tool head. But even crimpers that have a steel colored tool head are most commonly not stainless steel. The Speardiver mono and wire crimper is ALL stainless steel, perfect for a professional crimping job at home or on the boat.

Speardiver tip
For best holding strength and durability crimp in two spots slightly back from each end of the crimp, so that the crimp edge doesn't dig into the mono and cut into it. Leave the middle un-crimped. When possible lightly melt the end of the mono with a lighter to form a glob, before pulling it to the crimp. This will lessen the possibility of the mono slipping through the crimp.

Speardiver 1.5mm wetsuits in our best selling Reef camo pattern are the professional diver's choice for warm water diving. A true 1.5mm suit (1mm neoprene + .25mm Hyperstretch Lycra interior + .25mm Lycra exterior) it is ideal for warm tropical waters, providing complete environmental protection without overheating. Two piece construction with a beaver tail and two buckle closure, the hooded jacket and high waist pants are manufactured in high quality neoprene chosen for the ideal balance between stretch/softness and resistance to permanent compression. This neoprene combined with an anatomical wetsuit shape makes a Speardiver suit so comfortable you'll forget you're wearing a wetsuit.

The Speardiver 1.5mm wetsuit exterior is lined with durable high stretch Lycra, to maintain comfort and protect the neoprene and diver from cuts that can be caused by contact with bottom structure. Lycra also allows the printing of our unique Reef camouflage pattern. Rubberized GRID patches provide extra protection in high wear areas like knees and elbows, without affecting the stretchiness of the suit. A 5mm thick stitched on chest pad made of Supertex offers speargun loading comfort. Available from Spearfishing Store Speardiver Reef 1.5mm Spearfishing Wetsuit

This picture accurately shows the colors of the new Speardiver Marseilles rubber weight belts, available from FreediveStore.com.

In order from the top:
1. Black
2. Green
3. Red "camo"
4. Brown "camo"
5. Light brown

Speardiver open cell spearfishing wetsuits in long sizes, offer skinny divers and divers with a long body type great fit and comfort, making unnecessary the expense and uncertainty of ordering a custom tailored suit. Speardiver suits are very stretchy to begin with, and many divers who can't find a suit to fit them from other manufacturers are comfortable in regular size Speardiver wetsuits S, M, L, XL, 2XL and 3XL. The long sizes are specifically designed for divers with long torso and limbs, or thin divers. Typically with these body types, a regular size suit that will fit snugly around the torso and limbs creating a proper seal, will leave the sleeves and pant legs 2"-3" short. Long sizes are available in the Reef, Raptor and Pacific wetsuits .

Speardiver TALL and THIN Spearfishing Wetsuits

Pictured diver is 6'6" tall and weighs 235lb, wearing a size XL-Long 3mm Speardiver Reef suit.

Pictured diver is 6'1" tall and weighs 150lb, wearing a size M-Long Speardiver 3mm Pacific suit.

The first Speardiver long size suit, Predator size M-L, this pattern is not currently available in long sizes.

The Speardiver Stealth spearfishing GoPro mask features a quick detach GoPro mask mount. Unlike other GoPro mask setups, the Stealth GoPro mount is attached with a stainless steel Allen bolt, and comes with a stainless steel allen key which allows installation and removal of the mount in under a minute. Once tightened the GoPro mount grips the mask hard and there is no shifting between the mask and mount. The Stealth GoPro mask mount only weighs 0.2 ounces practically not increasing the weight of the mask. It can be left on the mask ready to use with a GoPro camera, or kept off the mask until needed. A retention nut is incorporated into the mount, all that's required to attach the GoPro is the housing thumb screw.

The Speardiver Stealth is a low volume spearfishing and freediving mask. A minimalist approach was taken with its design, without compromising any of the details and functionality required from a freedive spearfishing mask. Extremely light weight at only 6 ounces (170g). The soft ample skirt provides an excellent seal with a wide range of face shapes. The skirt exterior is finished in a unique matte non reflective silicone. The frame above and below the lenses has a textured surface which allows a secure hold on the mask for flushing and repositioning, even with gloved hands. The Speardiver Stealth mask provides an excellent field of view in all directions. The mask strap length is adjusted by pressing two easily accessible push buttons. The mask strap is robust and stretchy.

The Speardiver Stealth mask is available from Spearfishing Store Speardiver Stealth Spearfishing Mask

Available from FreediveStore.com Speardiver Reef Spearfishing Wetsuit.

The Speardiver Phantom speargun is available in lengths from 60cm to 120cm starting at $210.

Features

• Ergonomic handle with a reverse euro trigger mechanism and integrated loading butt for ease of loading. Two grips are included, plain and with a thumb rest.
• Wide mouth Stainless steel trigger mechanism casing easily accepts shafts with mono attached to the back without chafing the mono.
• Trigger mechanism accepts all standard euro (round notch) stainless steel shafts and South African coated shafts from 6.5mm to 7.5mm diameter.
• Stainless steel trigger.
• Stainless steel line release.
• Stainless steel heavy duty floatline anchoring point at the bottom of the handle.
• Trigger sensitivity dial adjusts firing pressure from 2lb down to 1lb.
• Sliding top safety can be easily secured in a permanent unlocked position.
• Black anodized aluminum barrel with integrated track. 28mm OD, 26mm ID.
• Open muzzle with bi-directional line wrap, accepts 3/4" (19mm), 5/8" (16mm) and 9/16" (14m) bands.
• Rigged with choice of 1 x 19mm, or 2 x 16mm Speardiver small ID rubber bands, and one or two wraps of 300lb or 400lb mono.
• Choice of 6.5mm or 7mm stainless steel single flopper pencil point shafts with small sharkfin tabs (7mm shaft has a rest tab), or South African coated single flopper tri-cut 6.5mm or 7mm notched shafts.
• Muzzle bungee made of synthetic rubber (will not dry rott) and a 400lb stainless steel pigstail snap swivel.
• Built in reel mount accpets Speardiver composite reel (sold separately) and other standard composite reels.

.

This is a free raffle for the new Speardiver 220 lumens LED spearfishing torch. Enter the raffle HERE. The draw is Friday Feb 1. Raffle may not be available to some new members, you'll know if you can enter when you go to the link. US shipping is included. Have fun

Features

• LED: 1 CREE LED – 220 lumens
• LED lifetime: 100,000 hours
• Anodized Aluminum housing
• Waterproof to 400 ft / 122 meters
• Uses two CR123 batteries (included)
• 8 hour burn time
• Magnetic slide switch
• Double O-ring protection
• Beam angle is 12 degrees
• Dimensions: Length 6.2" (16cm), Diameter grip area 1" (27mm), Head diameter 1.5" (38mm)
• Weight with batteries: 8 oz (226g)
• Lanyard is included

Description

This is our favorite spearfishing flashlight. It has a durable aluminum casing that unlike plastic will not shatter if tossed around in a dive bag with other gear. The grip area is only 1" in diameter, this is a very compact easy to grip and store light. Other lights that appear similar are significantly thicker at 1.5" diameter. The recess in the middle allows for a more secure grip, and installment of a clip for attachment to a speargun. This light has a simple to use thumb operated sliding on/off switch, without any other settings to waste time cycling through. The switch is magnetic and hassle free waterproof. The energy saving LED light provides great illumination with a tight focused beam. The two CR batteries provide a longer burn time than flashlights using AAA batteries. There are many nice looking compact waterproof flashlights that are marketed for spearfishing, we found all to be lacking in one or more of these categories. You need look no further than this Speardiver flashlight.

http://www.youtube.com/watch?v=-vcoQ0jDEtE

This is a free raffle for the new spearfishing DVD Fish To The Bone. Enter here Speardiver - DVD Fish To The Bone. The draw is new years day. Raffle may not be available to some new members, you'll know if you can enter when you go to the link. US shipping is included. Have fun

Available from FreediveStore.com Speardiver Zodiac Spearfishing Float

Features

• Tested 45lb of lift at the surface. *Unlike other manufacturers we don't overstate the buoyancy of our floats.
• Length: 45"
• Width 12.5"
• Diameter inflated: 6.5"
• Weight: 2.5lb
• Rugged puncture resistant 3 layer construction, Thermoplastic polyurethane / Nylon / Thermoplastic polyurethane. The same material used to manufacture inflatable boats.
• High visibility safety orange color.
• One way valve for inflation by mouth, with a threaded lock to protect against accidental deflation.
• A dump valve for quick and effortless deflation.
• Packs down small, great for traveling.
• Top pocket with Velcro closure to support the removable flag base. *Florida legal size dive flag and pole sold separately.
• Pocket with Velcro closure on the bottom for lead ballast, to keep the float upright when using a flag.
• Heavy duty stainless steel D rings at the front and back, for towing the float and attachment to other floats.
• Built in handle on top for carrying the float.

Speardiver Zodiac float buoyancy test - YouTube

Speardiver SA (South African) 7mm plated euro shafts are now available. Tri-cut, 3" barb, two notches. Very good corrosion protection coating. Polished notches and line hole.

Fits (I will update this list as I test the shafts with more guns):

• Rob Allen Vecta Handle/trigger mech
• Speardiver euro trigger mechs Trigger Mechanisms
• Beuchat Mundial handle/trigger mech

Price:
120cm $37
130cm $37
140cm $38
150cm $38.50
160cm $39
170cm $40
180cm $41

Speardiver trigger mechanisms are now available from www.FreediveStore.com. These high quality mechs come in 4 different styles, and each style has a variation for US or Euro shafts.

All mechs feature:

• Quiet firing.
• The casing is made from 316 grade stainless steel 2mm thick.
• Sear and Trigger are 8 mm thick stainless steel.
• All parts are precision CNC cut, which translates to a smooth trigger pull and safe loading.
• Each trigger mech is available for US and Euro style shafts.

Trigger mechanism housing dimensions:

• Length: 68 mm (2.76")
• Width: 13 mm (0.50")
• Height: 26 mm (1.02")

The side Line Release is the most common trigger mechanism used by most Spearos.

• US side line release trigger mechanism can hold up to 10 x 16 mm bands safely with a smooth trigger pull.
• Euro side line release trigger mechanism can hold up to 6 x 16 mm bands safely with a smooth trigger pull.

What's included:

• Side line release trigger mechanism.
• Line release arm.
• Line release arm pin.
• Side plate for line release with two screws
• Two 7cm (2.75") long x 5mm (0.2") diameter mounting pins.
• 5 year manufacturer's warranty.

Automatic resetting line release; when the spear engages the trigger mechanism the line relase arm moves to the locked position. The top line Release mech is similar to the side line release mech but is easier to install; just shape the speargun stock slightly under the line release arm for it to move freely.

• US top line release trigger mechanism can hold up to 10 x 16 mm bands safely with a smooth trigger pull.
• Euro top line release trigger mechanism can hold up to 6 x 16 mm bands safely with a smooth trigger pull.

What's included:

• Top line release trigger mechanism with line release arm.
• Two 2.75" (7cm) long x 0.2" (5mm) diameter mounting pins.
• 5 year manufacturer's warranty.

Automatic resetting line release; when the spear engages the trigger mechanism the line relase arm moves to the locked position. The Reverse Trigger Mechanism adds 5cm (2") of band stretch to your speargun in comparison with conventional trigger mechanisms. More band stretch means more power & more range, without increasing the length of the speargun. The extra band stretch is due to the shaft engaging the sear at the back end of the trigger mechanism instead of the front end as with conventional trigger mechanisms. Easy to install, just shape the speargun stock under the line release arm for it move freely.

• US reverse trigger mechanism can hold a maximum pressure of 1200lbs with a trigger pull of 5.75lb. 1200lbs is equivalent to approximately 12 x 16mm bands. To maintain a safety margin of 50% this mech should be used with a maximum of 6 x 16mm bands.
• Euro reverse trigger mechanism can hold a maximum pressure of 800lbs with a trigger pull of 5lb. 800lbs is equivalent to approximately 8 x 16mm bands. To maintain a safety margin of 50% this mech should be used with a maximum of 4 x 16mm bands.

What's included:

• Reverse top line release trigger mechanism with line release arm.
• Two 2.75" (7cm) long x 0.2" (5mm) diameter mounting pins.
• 5 year manufacturer's warranty.

Automatic resetting line release; when the spear engages the trigger mechanism the line relase arm moves to the locked position. The bottom line release allows the shooting line to be wrapped under the gun so it's out of sight when aiming.

• US bottom line release trigger mechanism can hold up to 10 x 16 mm bands safely with a smooth trigger pull.
• Euro bottom line release trigger mechanism can hold up to 6 x 16 mm bands safely with a smooth trigger pull.

What's included:

• Bottom line release trigger mechanism with line release arm.
• Two 2.75" (7cm) long x 0.2" (5mm) diameter mounting pins.
• 5 year manufacturer's warranty.

Available from FreediveStore.com

Total knife length: 8.46" (21.5cm)
Handle length: 4.23" (10.5cm)
Blade length: 4.33" (11cm)
Blade thickness: 0.15" (3.8mm)
Blade characteristics: Stainless steel, two serrated edges, Polished or Stealth (black teflon coated)
Knife weight: 3.95oz (112g)

Other characteristics:

• High visibility handle, easy to distinguish against any color wetsuit when quick deployment is required.
• Two serrated edges to eliminate the extra step of making sure the knife is turned correctly to cut mono, cable, or fish. The serrated edge easily cuts through 400lb mono and is capable of cutting through stainless steel cable.
• The blade is very stiff, it can be used to chip away rock to retrieve a stuck shaft, without fear of bending the knife tip or breaking the blade.
• The black coating on the blade eliminates reflection of the sun and minimized the chance of attracting predators such as barracuda to the flash.
• Being stainless steel even if the coating is scratched the knife blade will not rust.
• 3 ways of securing the knife in the sheath; Using the built in rubber loop that goes over the end of the handle, the loop is removable. Using the bungee to loop over the tip of the sheath. Or both.
• We prefer removing the rubber loop and using the bungee, it's the most secure system. In case of emergency the bungee is stretchy enough to pull the knife out of the sheath by force without first unlooping the bungee. Still the knife will never fall out on its own. The bungee loop can be used to put your hand through when dealing with a strong fish to avoid dropping the knife if you lose your grip by accident.
• Quick release plastic buckles with adjustable rubber straps.
• Sheath can be calf, thigh, or belt mounted. If calf mounted make sure it's on the inside of the calf to reduce the possibility of entanglement with discarded fishing line.

Spearfishing wetsuits by Speardiver. Read reviews from spearos around the world. Speardiver spearfishing wetsuits are available at Spearfishing Store.

These are the current Speardiver wetsuit color patterns. In the following posts you may see some of our past patterns that are no longer made. Speardiver dropped certain color patterns over the years but the construction and proprietary neoprene used in our wetsuits remain unchanged . The one notable difference is the chest loading pad which is now longer downwards to accommodate different preferences for speargun loading position.

Spearfishing Wetsuit Speardiver Reef

Spearfishing Wetsuit Speardiver Predator

Spearfishing Wetsuit Speardiver Pacific

Spearfishing Wetsuit Speardiver Kanaloa

Spearfishing Wetsuit Speardiver Sombra

Speardiver small hole speargun rubber tubing is available from FreediveStore.com, it's the highest quality rubber you will find. The tubing has a reduced inner diameter (ID) of 1/16" this means the hole is smaller than conventional speargun tubing. All other speargun band tubing comes with 1/8" inner diameter.

Speardiver small hole rubber tubing next to conventional 1/8" ID tubing.

Why this format was chosen

• Quality speargun rubber tubing is made of Latex/natural rubber, which comes from the sap of the rubber tree. Latex in its natural color Amber is less resistant to sunlight. An outer layer of black dyed Latex adds UV protection and extends the life and performance of the band.
• Cut a band after a day of spearfishing and you'll see water come out of the hole. The cycles of stretching and compression draw water into the band no matter how well you tie the wishbone, and it remains trapped there. Salt water damages the band from the inside, you can see this layer of deteriorated rubber immediately around the hole of a well used band. The small 1/16" hole significantly lessens water intrusion into the band, improving performance and increasing longevity.
• Less hole equals more rubber at the same diameter, which equals more power without increasing the profile of your speargun.