Posts by ivan_lopez73

Quote from Marco

La cagaste! Lava esa mierda lo antes posible!!! Nivea creme as well as other petroleum based creams/oils swell latex rubber.

Just fresh water all over the gun and let it dry in the shade in a well ventilated place. Forget about white color. Your rubber bands should last for at least 6 months (usually more). Then, you can replace them with any 16 mm bands you find in Italy.

Don't even toch the shaft. RA shafts tend to rust when the loose the surface treatment.

hahahahh...
what kind of rubbers here will be similar?

Today i bought a Cressi Occhio plus, because i cant use the Alien any more...too fog, and i make a lot of procedures to risolve that matter and nothing....
I try today about 10 different ones, and the Cressi willbe the most confortable...
Anyones has?

oye, y no es incomodo bucar con el chaleco?

Tan buenos los pescaos esos

Quote from seahunter49

Puts an image in my head of the bands slipping through your hands on loading and the articulated metal wishbone (if that's what the gun has) taking off a finger. Make sure you wash the bands with detergent before use.

jajajajaja...i imaginate something like that

Quote from monster slayer

Ivan, i asume that you are using amber rubbers, they are the most prone to become white with water. It will dissappear as long as you rinse it with some silicone spray. Do not leave rubber in the water or water on the rubber.

Im using the R.A. blue rubbers..yesterday i put a film of Nivea cream :0 on it, i hope thats works

Quote from monster slayer

I always have spearfishing dreams, some nightmares, some real good dreams. Dan does that count as a wet dream???

jajajajaajja

ta' cabron el loro ese....

thanks all..
Its normale that "white color" that my rubbers take?
Could be the "hard water" that we have here in our houses in Rome?

There some kind of maintenance that we have to do to ours rubbers spearguns?
I always rinse with water, but i see in the R.A. web site they sell a silicone spray for the rubbers and wishbones...
Can i buy a "normal" silicone spray for my rubbers? (they already take some "withe stains" color outside)

here other:
http://www.ermes-sub.it/erm-arb.html

espoleta arriba o abajo?

Hi, someone can explain me the difference between hawaiian and tahitian shaft?
En español como se llaman?
Thanks

jajajjaja el pobre, se jodio

I dnt know how they are, i just search on the net
http://www.arbaleteinlegno.it/…n_legno_presentazione.htm
http://www.galasub.it/catalogoIT.asp?scat=11

Quote from seahunter49

Tambien recuerdo el jaboncillo, un tipo flojo y resbaloso Te da la medida que no hay pescado cuando empiezes a dispararle a estos peces pero se come igual.

hahahaha...yo le dispare porque pensaba que era un guativere, despues me di cuenta que era otra cosa hahahahah

mira, es este:
http://portal.unesco.org/portaloceanico/ev.php?URL_ID=8694&URL_DO=DO_TOPIC&URL_SECTION=201&reload=1173283910

yo me acuerdo que hace mucho tiempo coji un jaboncillo que tenia la carne azulita (menos que ese tuyo)
y un agujon con la carne verde

Quote from seahunter49

I think monster is talking about wood guns. You can't get a wood gun in Europe for cheap either.

here about 200 Euros and up

Quote from JimCuda

Davie, that makes too much sense. I blame violence on TV, especially cartoons!

On a side note, is this funny? I don't know what they are saying.

http://www.youtube.com/watch?v=EGI52iiIcxg&feature=related

Display More

Absolutly no