Posts by lidiver

Quote from Marco

Welcome Stefan. You were using extremely stiff fins. What´s your weight?

Thanks for the warm welcome, guys!

I walk at an average of 240 for 6' tall - definitely overweight... I tried plenty of fins but at over $400 a pop it is getting expensive to keep trying. I had high hopes for the C4 40, but I find them soft as wet noodles. The trick with the #5 is not to even think about overpowering them or bending them at 90 degrees - it will not happen. But put the right pressure on them and they will take you through the nastiest stuff you can imagine - including swimming big fish up when the reel jams.

Can you pour-in a new guide? Use the router to made a deeper channel (plenty images and instructions on the gun building threads), then pour in the compound and re-cut the channel - it will be shallower in the middle (or deeper, or to the left or right depending of the bend) but it will be true and a much cheaper solution than replacing the stock.

Hi,
I stumbled on this forum while searching for Dan's Pursuit fins... I'm from Long Island, NY and green with envy when thinking about the Florida guys who get to dive almost year around. Most of my dives are in 30 - 60 ft and in 8 - 15ft viz for 30-50lb stripers, in bad current (strong tidal current going over reefs that raise from 150ft to 30ft).

More than half of my dives I'm alone - either from the shore or from my jetski. The other half are from boats with a few close friends.

Gear-wise I am a strong believer in rail-guns, but recently I'm going over on the dark side of mid-handles: I started using a short Riffe M1 last year, and this year I got a mid-handle hybrid. I'm still struggling to find the perfect fins and so far I settled on the Nemo #5 (went through Sporasub Carbon and C4 Mustang Flap 40 before this, plus a bunch of plastic).

...not a big fan of long introductions, but looking forward for some great threads!

Stefan