Been a while since I have posted any guns up due to being extremely busy renovating my house, but this is a gun i have been working on for the last few weeks, some spec’s – 1.25m o/all length Hybrid design – carbon ‘speardiver’ barrel, African Padauk rear Rear handle/euro gun, open graphite track, open muzzle, neptonics mech, JBL handle (used this for the in-built safety since this gun is being donated to a spearfishing comp), 7mm speardiver shaft. So here’s some pics of the build – Enjoy - Gear all ready to go – Design cut out and barrel fitted in to blank – Rounding over begun and more shaping to give it some curves (sorry for the rubbish photo) – More shaping (this process took me a long time) – Once I was happy with the shape I went on and poured my graphite track, now I cut my tracks out with a slightly oversize bit for a trigger mech and then route the trigger area also, this pic shows the track poured – Track dry and flushed with top of blank – And the trigger cut out, you can see why I oversize the track as when I route out the trigger, the area the trigger is set into is completely sealed with epoxy – Trigger set in and pinned – Handle recessed in – So this is what the gun looks like o/all – Finally progress as of this afternoon – first coat of epoxy on the gun – Hopefully the gun will be coated enough to ballast in the next few days, then all will be completed (just in time for the comp on the 10th Feb) Jono