I just got a use cyrano and i want to pain it but i dont know what type of pain i can use or if there is anything more i can use ? thank you for any info in advance .
mares cyrano 39"
-
-
I just got a use cyrano and i want to pain it but i dont know what type of pain i can use or if there is anything more i can use ? thank you for any info in advance .
Any automotive paints in touch up spray can are fine. Scotch pad it wipe it with alcohol or acetone then shoot the pattern you like. You could also sponge paint it and cover with clear polyurethane.
Cheers, Don
-
I used shrink tubing once on Cyrano 970, turned out good. Until I did that I didn't know shrink tubing comes in such a large diameter. You have to pick the right diameter and shrink ratio. The shrink tubing I found is black and somewhat glossy.
-
The fish like bling:D:D Some inspiration from Dark Side.
Cheers, Don
-
don and dan thank you guys a lot for the info ,
don do you know the easy way to do camo your self with paint?
que viva la pesca:cuba:
-
I cut a pattern in a paper towel tube when I camo'd my polespear it worked out really well although it sucked cutting the pattern.
-
don i got today the polyurethane clear gloss fast drying from minwax at home depot is that one a good one or i need diferent one??
que viva la pesca :cuba:
-
don i got today the polyurethane clear gloss fast drying from minwax at home depot is that one a good one or i need diferent one??
que viva la pesca :cuba:
That will be fine, There is a thread around here about camo painting a gun, I'm heading out to catch dinner before it rains here.back in the Am.
Cheers, Don
-
-
-
-
The Cyrano starts out with a rubberized coating over the aluminum barrel. You need to make sure you strip it all off. I think to do it properly you'll need to disassemble the gun.
-
this two is after being send it and ready to paint
URL=http://img84.imageshack.us/i/picture003nl.jpg/][/URL]Uploaded with ImageShack.us
-
The Cyrano starts out with a rubberized coating over the aluminum barrel. You need to make sure you strip it all off. I think to do it properly you'll need to disassemble the gun.
dan i sand it very good to smoth but no to close to the metal to be able to use the bottom coating that they use i think it came out good , thank for the info but i dont have any tool to do it like that and i dont know how .
-
here is the fisrt hand of paint
Uploaded with ImageShack.us
Uploaded with ImageShack.us
right now is drying from clear finish that don tell me to use it may take 3 to 4 hr to dry i will post the finish pict later
-
The clear poly will take a week to cure well and not scratch easily, I'll post some ways to rig the muzzle later, I need to sleep., was on a date with Mother Ocean last night.;)
Cheers, Don
-
tulocote is there a dive shop nearby, lots of shop old air gun parts laying around cheap, Cyrano have been around for a while. could you run 400 lb mono through the hole some one drilled and loop around the barrel and crimp?
Cheers, Don
-
if you lok at the pic where you run the line is crack all the way thru and i can drill side ways but it wil make it weak
-
Do to the pressure I would look for a used muzzle, when the sun bake on it the plastic may fail. E-bay is another good place, I'll have a look and come back.
Cheers, Don
-
I don't know if this will work ?
Cheers, Don
Create an account or sign in to comment
You need to be a member to leave a comment.