Guns of the legends Collection

  • Hi, I'd be very grateful if someone could provide me the manual cutting and scanning crucero y fragata Nemrod, also look for catalogs selling diving equipment brand Nimrod scanned data shared greetings to all.



    • Helpful

    Hi, I'd be very grateful if someone could provide me the manual cutting and scanning crucero y fragata Nemrod, also look for catalogs selling diving equipment brand Nimrod scanned data shared.

    I have a a original Nemrod owners manual that came with my Crucero I can scan in a week, it covers Crucero, Fragata, Corbeta and Goleta. I need to get a new flatbed scanner first. I also have Nemrod parts catalogs I can scan.


    Cheers, Don

    "Great mother ocean brought forth all life, it is my eternal home'' Don Berry from Blue Water Hunters.


    Spearfishing Store the freediving and spearfishing equipment specialists.

  • Hi, I'd be very grateful if someone could provide me the manual cutting and scanning crucero y fragata Nemrod, also look for catalogs selling diving equipment brand Nimrod scanned data shared greetings to all.


    http://img23.imageshack.us/img23/184/81426775.jpg


    http://img521.imageshack.us/img521/2263/despciclon.jpg


    Interesting trigger mechanism on the "Ciclon" speargun as the sear lever at the rear pivots on the same pin as the trigger. I have never seen inside one of these, although I have seen coaxial pin trigger mechanisms in some of the trigger mechanism patent diagrams, however not everything ends up being manufactured. An ancient Chinese crossbow mechanism used a shared pivot pin for sear lever and trigger, but they were both situated close around the pin and did not extend forwards like the sear tooth does on this speargun mechanism. Do you actually have one of these "Ciclon" guns?


    I checked the patent and what I thought was the sear lever is actually the cage for the sear pin, in fact this is a dipping sear tooth design like the Sporasub of similar vintage. The sear lever part 7469 does not have a backing projection, it just has a sear tooth and an elongated angled slot for the sear lever to move up and down on the sear pin as well as rotating around it for the shot. Yoke-type sear levers have a sear tooth and a backing projection immediately behind the sear tooth, examples are Riffe/Undersee and Sea Hornet/Biller.

    Edited once, last by popgun pete: extra info ().

  • The cyclone, has in the output shaft by a pivot when you get the harpoon deslaza up releasing the wire that is attached to the bottom pivot.
    Nimrod fabricate this rifle for the pear and Beuchat, were exactly the same, in recent times Nimrod, before closing the factory in 98 of fabricate with oval aluminum tube,the name is Nemrod sark


    El ciclon, tiene en la salida del arpon un pivote que cuando sale el arpon se deslaza hacia arriba soltando el hilo que va sujeto por la parte de abajo del pivote.
    Nemrod fabrico este fusil para el y pera beuchat, eran exactamente los mismos, en los ultimos tiempos Nemrod, antes de cerrar la fabrica en el año 98 los fabrico con el tubo de aluminio ovalado se llamaba Nemrod sark.

  • The cyclone, has in the output shaft by a pivot when you get the harpoon deslaza up releasing the wire that is attached to the bottom pivot.
    Nimrod fabricate this rifle for the pear and Beuchat, were exactly the same, in recent times Nimrod, before closing the factory in 98 of fabricate with oval aluminum tube,the name is Nemrod sark


    El ciclon, tiene en la salida del arpon un pivote que cuando sale el arpon se deslaza hacia arriba soltando el hilo que va sujeto por la parte de abajo del pivote.
    Nemrod fabrico este fusil para el y pera beuchat, eran exactamente los mismos, en los ultimos tiempos Nemrod, antes de cerrar la fabrica en el año 98 los fabrico con el tubo de aluminio ovalado se llamaba Nemrod sark.


    The function was similar, but "Beuchat" had the sear pin in a round hole in the sear lever with the sear pin moving in a metal cage with curved slots on either side, in fact that system is still used by them today. The sear pin moves up and down in the curved slot allowing the spear tail to push the sear tooth temporarily out of the way so that it can pass over the top of it when reloading the gun. "Marin" (France) had a similar arrangement to that used by "Beuchat", but the curved slots for the sear pin movement were molded into the sides of the plastic "clamshell" molding handle rather than the handle having a metal cage. "Scubapro" used to sell these same "Marin" spearguns with their own name molded into the side-plates. "Rob Allen" and "Sporasub" used the slotted sear lever type, but the spring locations vary and some guns are more reliable than others. The Nemrod gun uses the cage and the slotted sear lever, so it in a sense borrows from both types. I don't remember the "Cyclone" (Ciclon) being sold here, "Nemrod" was a big presence in Australia in the sixties and seventies, their equipment was widely available and I and many other divers owned "Nemrod" diving equipment, then they suddenly disappeared here with no real explanation. The last "Nemrod" guns sold here and in limited numbers were the pneumatic "Mariner", with the "Clipper" pneumatic models continuing on in their orange handle version. "Nemrod" band guns were the "Gaucho" series which used the handle from the "Silver" series pneumatic spearguns, rear handle band gun models from "Nemrod" were not available as far as I know, so finally seeing the "Cyclone" advertisement and gun is very interesting.

  • These are the last models were produced, the sark.
    The factory in Villarubis Nimrod, Barcelona, stopped working at 98, and now have reopened, I buy a brand name items safari beach called sub, but it is not what it was, now all you bring from China.


    Estos son los ultimos modelos que se fabricaron, el sark.
    La fabrica Nemrod en Villarubis, Barcelona, dejo de funcionar en el 98, y ahora la han vuelto a abrir, compro el nombre una marca de articulos de playa llamada safari sub, pero no es lo que era, ahora todo lo traen de china.






    Clipper 3º generacion y ultima




  • Thanks for the photos of the 3rd generation "Clipper". They never came here, although I had seen a few on eBay and noted the sculpted fingergrip handle and trigger finger guard mounted line release. Final "Clipper" guns sold here were holster-mounted "Mini" versions with the orange and silver color scheme, probably "new" old stock. They carried a knife in a second sheath built into the holster. I never saw anyone use one, the holster that is!

  • Los Clipper con funda son muy bonitos para decorar, para usarlos no son muy buenos sobre todo por la incomodidad de llevar algo tan grande sujeto a la pierna, estos son muy cotizados alli en Estados Unidos, sobre todo en los foros de la guerra de las galaxias
    observa lo que hacen con un nemrod Galeon, que sacrilegio.
    Cloud City Blaster ***Potential Active Project***


    The Clipper with cover are very nice to decorate, to use them are not very good especially because of the inconvenience of carrying something that big subject to the leg, these are listed there in the U.S., especially in forums of the film star wars.
    watch what they do with a Nimrod Galeon, that sacrilege.
    Cloud City Blaster ***Potential Active Project***

  • Los Clipper con funda son muy bonitos para decorar, para usarlos no son muy buenos sobre todo por la incomodidad de llevar algo tan grande sujeto a la pierna, estos son muy cotizados alli en Estados Unidos, sobre todo en los foros de la guerra de las galaxias
    observa lo que hacen con un nemrod Galeon, que sacrilegio.
    Cloud City Blaster ***Potential Active Project***


    The Clipper with cover are very nice to decorate, to use them are not very good especially because of the inconvenience of carrying something that big subject to the leg, these are listed there in the U.S., especially in forums of the film star wars.
    watch what they do with a Nimrod Galeon, that sacrilege.
    Cloud City Blaster ***Potential Active Project***


    Yes, especially if good guns are converted rather than using already damaged models. Maybe Nemrod could have stayed in business making rayguns! Now I understand where all those old guns have disappeared to in the last decade or so.

Create an account or sign in to comment

You need to be a member to leave a comment.