This topic came to me wandering around the head long ago, for those who have guns Beuchat and already had done so long ago, for the hybrid wood, but as I had to fix the mast Iroco then dismantle it and take the opportunity to make some pictures
the it is simple to make and easy, the only thing is to get the soldering iron
1 piece stainless steel tube of diameter 1 ctms
1 piece of plate steel.
2 short steel screws to hold your choice pair the reel to the plate.
1 long screw for passing through the axis of the handle mounting guide
3 nuts and washers stainless antiblocantes
Its development is easy, cut a scrap piece of pipe 3 long x 1 ctms ctms diameter, rajamos above and with a steep or chisel, open it with a piece of iron or tape we put in the middle and I hammered to make it flat on its base, but the sides are deformed
and curved so it fits in the handle mounting guide, when we have adapted, we calculate to make the hole where the screw anger that endures.
We then cut the piece of plate and weld it here because it depends not give measures that will reel you looking to add or make, just follow the sequence of photos, use this practisub, so simple and practical it is. I hope you let Nickel:)
This option validates adapted for guns Omer, Freesub, freedivers and all rail carrying inverted T-shaped for coupling of reels
<º)))))><
Este tema me venia rondando por la cabeza hace tiempo, para los que tienen fusiles Beuchat y ya lo tenia hecho hace tiempo para el hibrido de madera, pero como tenia que arreglar el mástil de Iroco entonces lo desmonte y aproveche para hacerle unas fotos, la forma es sencilla de hacer y fácil, lo único es conseguir el soldador
1 Trozo tubo de inox de diámetro 1 ctms
1 Trozo de pletina inox.
2 Tornillos cortos inox, a vuestra elección par sujetar el carrete a la pletina.
1 Tornillo largo para que pase por el eje de la guía soporte de la empuñadura
3 Tuercas antiblocantes o grover inox
El desarrollo del mismo es fácil, cortamos un trozo el trozo de tubo 3 ctms largo x 1 ctms de diámetro, lo rajamos por encima y con una escarpara o cincel, lo abrimos, con un trozo de hierro o pletina lo metemos por en medio y lo martillamos hasta hacerlo plano en su base, sin que los lados se deformen y queden curvos, para su encaje en la guía soporte de la empuñadura, cuando lo hayamos adaptado, calculamos para hacerle el agujero donde ira el tornillo que lo aguanta.
Después cortamos el trozo de pletina y lo soldamos, aquí no doy medidas porque depende que carrete le queráis añadir o poner, solo seguir la secuencia de las fotos, uso este practisub, por lo sencillo y practico que es. espero que lo dejéis niquelado:)
Esta opción de adaptado valida para fusiles Omer, Freesub, Freedivers y todos los que lleven rail en forma de T invertida para acople de sus carrete