what gun Euro Riffe 120 or Rob Allen carbon 120 ???

i think the rusty shafts were recalled.

Rusting is good. If the shaft comes out, it wont go far, as it dies from tetanus.

Quote from av001

i think the rusty shafts were recalled.

Most of the shafts that were rusting was because the dumbasses tried to scrub off the surface rust there by removing the protective coating...

ask me how I know

you read it on SB? <img src= " height="23" srcset="https://spearfishing.world/forum/images/smilies/emojione/1f606@2x.png 2x">

Quote from av001

put a rob allen shaft in the riffe euro, it fits. the riffe shafts bend really easy and they are 75 $

It won`t work unless you drill a hole in some other placement. The line doesn`t fit the riffe t. mech.

I tried to use a ra shaft in my Riffe euro. It doesn`t wok unless you want to use it for freeshafting

And if you drill a hole it will rust.

I know that Sheri Daye have a hybrid that use a rob allen shaft, but it was a modification on the trigger by Daryl.

Ra should consider making a bunch of shafts suited for American triggers. That would be a hit.

It´s funny, some ole local spearos used to make spearguns and the shaft they used was made out of car trunk rods. They still swear by them.

I heard about that in Cuba as well. Can't figure out exactly which part of the car trunk though.

The trunk rods were the trunk spring rods
We also used the rods that held up the car hood, but they were not as good

Trunk spring rods? Do they need to be straightened or something?

Yup, they were cut and then put workholding in the lathe. I am not familiar with the procedure tho. But always that comes up in some conversations about shaft quality. They use to say that shafts from trunk rods are the best. I don´t see how. I would prefer to invest in a good shaft my self

black1---to get back to your question.
Buy the RA carbon with RA reel. Later on you can sell all those other guns you have and buy more RAs like I did
That way all your guns will handle and shoot the same :attack3:
:bs2:

Sorry, just my opinion [ which is what you asked for ]

Quote from hau

black1---to get back to your question.
Buy the RA carbon with RA reel. Later on you can sell all those other guns you have and buy more RAs like I did
That way all your guns will handle and shoot the same :attack3:
:bs2:

Sorry, just my opinion [ which is what you asked for ]

Too late Hau, he did the right thing and bought a Riffe euro .. <img src= " height="23" srcset="https://spearfishing.world/forum/images/smilies/emojione/1f606@2x.png 2x">

Quote from Pucho

I use to have a riffe eurogun 110(that I miss a lot:() a 130 sea sniper and have use a 100 rob allen aluminum, like Marco told you, if you are using and it works for you stay with the riffe, for me is the best gun of the 3 that i mention, lots of power for a wood that thin, easy to maneuver under water and that shaft holds big fish, I use to have a shaft with a slip tip from plamen kolev (for me one of the best slip tips around), my nephew use to have a C3 and got a 110X and he is blasting fish like crazy, can get them cheap on ebay used.

What happen with your Euro? Did you sell it?

monster,, no mames guey.. la chingada con riffe carnal

Sometimes I think Monster is on Riffe's payroll

RA forever... they are so good they shoot on their own:0

btw last time out i was out of air heading up from that last ledge, i saw a mutton from the corner of my eye i swam back down chased him and shot from about 15 ft away with my 130, i was surprised i hit him. stupid move though as i surfaced i was dizzy.

stupid mistake, i will learn from it.

At least Pantoja was near right?

yea he was, i surfaced i looked and he was to my left. i was a little disoriented.